Cutler-Hammer - Eaton Canada
Cutler-Hammer - Eaton Canada
Cutler-Hammer - Eaton Canada
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Changing Parameter Settings<br />
SECTION 3<br />
Selecting the Parameter to Set<br />
Changing the settings of parameters on your drive<br />
is a two step process. First you select the<br />
parameter and then you change its settings.<br />
The following steps discuss how to select the<br />
parameter you wish to change.<br />
For a complete discussion of the your AF93/IS903<br />
Parameters refer to Section 4, Using The<br />
Parameters . The Appendix has a list of AF93/IS903<br />
Parameters in numerical and alphabetical order.<br />
Step 1a.If the Operate indicator is lit, press the<br />
Setup button.<br />
3-10<br />
Note that the Operate indicator goes out<br />
and the Scroll indicator comes on.<br />
The LCD now shows the name of a<br />
parameter on the top line and its current<br />
setting on the bottom line.<br />
Step 1b.If the Change Settings indicator is lit, press<br />
the Setup button.<br />
Note that the Change Settings indicator<br />
goes out and the Scroll indicator comes on.<br />
Step 2. Press Up or Down button until the<br />
parameter you want to change appears on<br />
the top line of the LCD.<br />
AF93/IS903 Instruction Manual<br />
Scroll<br />
Scroll<br />
<strong>Cutler</strong>-<strong>Hammer</strong><br />
SETUP<br />
Change Settings<br />
OPERATE<br />
Keypad<br />
Remote<br />
SELECT<br />
<strong>Cutler</strong>-<strong>Hammer</strong><br />
SETUP<br />
Change Settings<br />
OPERATE<br />
Keypad<br />
Remote<br />
SELECT<br />
Forward<br />
Reverse<br />
UP<br />
DOWN<br />
Forward<br />
Reverse<br />
UP<br />
DOWN<br />
F/R<br />
START<br />
STOP<br />
F/R<br />
START<br />
STOP<br />
RUN<br />
FAULT<br />
ETN-17.A<br />
RUN<br />
FAULT<br />
ETN-18.A