advanced building skins 14 | 15 June 2012 - lamp.tugraz.at - Graz ...

More documents

Recommendations

Info

Advanced Building Skins Figure 2: Cross sectional view An additional challenge lay in the investigation of the required pre-tension force in the cable, in conjunction with the assembly sequence and the structural conditions. That the roof had to be assembled approximately 35m above the ground also meant that equipment had to be planned and manufactured. After some initial difficulties, after the release of the barrel roof, the project was completed to the satisfaction of all involved and since then features prominently in the Vienna roof landscape. Technical data: Length approx. 20 m Width approx. 12 m Arch length approx. 15 m Glass surface approx. 250 m² Glass format approx. 815 x 1,065 mm Glass structure 2 x 12 mm TVG with 1,52 mm PVB - foil Tubular steel for frame FR 193.7 x 10 mm, S355 Figure 3: Central joining node - 3 -
Advanced Building Skins Figure 4: Large scale prototyping Figure 5: Assembly 2.2 Renewal of the Funicular Railway Baku, Azerbaijan The construction of the existing Funicular Railway in Baku dates back to the 1960s. It is currently in the process of being completely renewed. Next to a new track, the existing top and valley stations will be demolished and replaced with a new steel–glass grid-shell structure to be constructed by the Upper Austrian company GIG. The valley station is not far from the site of the event complex that will host the Eurovision Song Contest 2012. The valley station connects the Boulevard with the elevated ground that is the site where the so called “Flame Towers” are to be built. - 4 -
Page 1 and 2:
advanced building skins 14 | 15 Jun
Page 3 and 4:
Editorial advanced building skins -
Page 5 and 6:
ABS_07 Lucio Blandini Timo Schmidt
Page 7 and 8:
Prof. Dr.nat.techn. Oliver Englhard
Page 9 and 10:
Advanced Building Skins Figure 3: A
Page 11 and 12:
2.2 Geometrical Processing Advanced
Page 13 and 14:
3 Digital Data Advanced Building Sk
Page 15 and 16:
4 References Advanced Building Skin
Page 17 and 18:
Advanced Building Skins 2 The Creat
Page 19 and 20:
Advanced Building Skins Figure 5: f
Page 21 and 22:
Advanced Building Skins The next st
Page 23 and 24:
Advanced Building Skins The Kilden
Page 25 and 26:
2.1 Maintenance Advanced Building S
Page 27 and 28:
4.2 Fire Protection Advanced Buildi
Page 29 and 30:
7 Acknowledgements Advanced Buildin
Page 31 and 32:
2 Cable-Stayed Glass Façade Advanc
Page 33 and 34:
Advanced Building Skins The outer s
Page 35 and 36:
Advanced Building Skins Figure 10:
Page 37 and 38:
Advanced Building Skins Figure 1 a
Page 39 and 40:
Advanced Building Skins Figure 5: S
Page 41 and 42:
Advanced Building Skins Figure 11:
Page 43 and 44:
Page 45 and 46:
Advanced Building Skins Figure 2: H
Page 47 and 48:
4.1 Schüco Aluminium Window System
Page 49 and 50:
Advanced Building Skins 5 Installat
Page 51 and 52:
Advanced Building Skins Figure 1: B
Page 53 and 54:
Advanced Building Skins Another pro
Page 55 and 56:
2.2 Variety of Solutions Advanced B
Page 57 and 58:
Advanced Building Skins Air exchang
Page 59 and 60:
Advanced Building Skins Bq/m 3 in t
Page 61 and 62:
Advanced Building Skins Usually the
Page 63 and 64:
Advanced Building Skins Figure 5: T
Page 65 and 66:
10 References Advanced Building Ski
Page 67 and 68:
Advanced Building Skins Figure 1: P
Page 69 and 70:
Advanced Building Skins Likewise, a
Page 71 and 72:
3.2 Method Advanced Building Skins
Page 73 and 74:
Advanced Building Skins 3.4 Sensiti
Page 75 and 76:
Advanced Building Skins Figure 9: V
Page 77 and 78:
Page 79 and 80:
Advanced Building Skins Planning te
Page 81 and 82:
Insulation material Glass wool boar
Page 83 and 84:
Primary energy, non renewable kWh p
Page 85 and 86:
Advanced Building Skins timber fram
Page 87 and 88:
Page 89 and 90:
Advanced Building Skins Figure 1: C
Page 91 and 92:
Advanced Building Skins 2.1 Interna
Page 93 and 94:
2.2.2 ÖGNB (TQB) Advanced Building
Page 95 and 96:
Advanced Building Skins Again the p
Page 97 and 98:
Advanced Building Skins Table 1: As
Page 99 and 100:
Advanced Building Skins [6] Interna
Page 101 and 102:
Page 103 and 104:
3 Examples 3.1 Reiss Façade, Londo
Page 105 and 106:
Advanced Building Skins properties
Page 107 and 108:
Page 109 and 110:
Advanced Building Skins tensile str
Page 111 and 112:
Advanced Building Skins Deep drawin
Page 113 and 114:
Advanced Building Skins Ellipsoid o
Page 115 and 116:
Advanced Building Skins 4.3 Creatio
Page 117 and 118:
Page 119 and 120:
Advanced Building Skins Figure 2: N
Page 121 and 122:
Advanced Building Skins Of the two
Page 123 and 124:
Advanced Building Skins correspond
Page 125 and 126:
Page 127 and 128:
Advanced Building Skins 1 Shells in
Page 129 and 130:
a) A.3a. Selection of segments A.4a
Page 131 and 132:
4.1 Material Properties Advanced Bu
Page 133 and 134:
5 Connecting Methods Advanced Build
Page 135 and 136:
Page 137 and 138:
5 Innovative Material Use 5.1 Struc
Page 139 and 140:
Advanced Building Skins Figure 5: S
Page 141 and 142:
8 Conclusion Advanced Building Skin
Page 143 and 144:
Page 145 and 146:
2.2 Contact Materials Advanced Buil
Page 147 and 148:
3.1 Rectangular Glass Fins Advanced
Page 149 and 150:
Advanced Building Skins Figure 9 sh
Page 151 and 152:
Page 153 and 154:
Advanced Building Skins 3 Design Me
Page 155 and 156:
Advanced Building Skins This compar
Page 157 and 158:
Advanced Building Skins weight plus
Page 159 and 160:
Advanced Building Skins For the fra
Page 161 and 162:
Page 163 and 164:
Advanced Building Skins round court
Page 165 and 166:
Advanced Building Skins 4 Cone 5 -
Page 167 and 168:
Advanced Building Skins Y Z Figure
Page 169 and 170:
Page 171 and 172:
1.2 Mapping Advanced Building Skins
Page 173 and 174:
Advanced Building Skins Figure 2: A
Page 175 and 176:
Advanced Building Skins In addition
Page 177 and 178:
Advanced Building Skins process und
Page 179 and 180:
Page 181 and 182:
Advanced Building Skins does not co
Page 183 and 184:
Advanced Building Skins such materi
Page 185 and 186:
Advanced Building Skins reduced. Th
Page 187 and 188:
Advanced Building Skins Due to its
Page 189 and 190:
Page 191 and 192:
Advanced Building Skins Compared t
Page 193 and 194:
Test number Inlet temperature [°C]
Page 195 and 196:
Advanced Building Skins The next se
Page 197 and 198:
Page 199 and 200:
Rdd [-] 0.50 0.45 0.40 0.35 0.30 0.
Page 201 and 202:
E [kWh/m²/ ° Advanced Building Sk
Page 203 and 204: +110 +100 West +80 +120 +70 +60 +13
Page 205 and 206: 3 Summary Advanced Building Skins T
Page 207 and 208: 1 Introduction Advanced Building Sk
Page 209 and 210: Advanced Building Skins facade. The
Page 211 and 212: Advanced Building Skins Figure 4: T
Page 213 and 214: 5 Photometric investigations Advanc
Page 215 and 216: Prof. Dr.nat.techn. Oliver Englhard
Page 217 and 218: 1.3 A Closed Facade Area of 32 % Ad
Page 219 and 220: Advanced Building Skins 1.5 Closed-
Page 221 and 222: Advanced Building Skins Second Part
Page 225 and 226: Advanced Building Skins This assump
Page 227 and 228: Advanced Building Skins The require
Page 229 and 230: Advanced Building Skins Figure 7: T
Page 231 and 232: Advanced Building Skins Figure 9: I
Page 235 and 236: Advanced Building Skins Figure 3: K
Page 237 and 238: Advanced Building Skins Hartenaugas
Page 241 and 242: Advanced Building Skins 2.2 Determi
Page 243 and 244: Performance Condition Advanced Buil
Page 245 and 246: Advanced Building Skins 5 Cable Net
Page 247 and 248: 5.4 Glass Clamp Connector Advanced
Page 249 and 250: Advanced Building Skins Figure 14:
Page 251 and 252: Advanced Building Skins elasto-plas
Page 253: Example projects include: Advanced
Page 257 and 258: Advanced Building Skins Language ba
Page 259 and 260: 3 Summary and Conclusion Advanced B
Page 261 and 262: GENERAL PROPERTIES WEIGHT MORPHABIL
Page 263 and 264: Advanced Building Skins Regarding t
Page 265 and 266: Advanced Building Skins applied to
Page 267 and 268: 4 Comparison Advanced Building Skin
Page 269 and 270: 5 Conclusion Advanced Building Skin
Page 271 and 272: Advanced Building Skins Façades a
Page 273 and 274: Advanced Building Skins The deforma
Page 275 and 276: Advanced Building Skins In this cas
Page 277 and 278: Advanced Building Skins The interna
Page 279 and 280: Advanced Building Skins Because the
Page 281 and 282: Advanced Building Skins designers.
Page 283 and 284: Advanced Building Skins anchor poin
Page 285 and 286: Advanced Building Skins In a first
show all

advanced building skins 14 | 15 June 2012 - lamp.tugraz.at - Graz ...

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?