OfficeScan 10 Administrator's Guide - Online Help Home - Trend Micro

To add a policy exception:
Using the OfficeScan Firewall
PATH: NETWORKED COMPUTERS > FIREWALL > POLICIES > EDIT EXCEPTION TEMPLATE > ADD
1. Type a name for the policy exception.
2. Select the action OfficeScan will perform on network traffic (block or allow traffic
that meets the exception criteria) and the traffic direction (inbound or outbound
network traffic on the client computer).
3. Select the type of network protocol: TCP, UDP, or ICMP.
4. Specify ports on the client computer on which to perform the action.
5. Select client computer IP addresses to include in the exception. For example, if you
select Deny all network traffic (Inbound and Outbound) and type the IP address
for a single computer on the network, then any client that has this exception in its
policy will not be able to send or receive data to or from that IP address.
6. Click Save.
To edit a policy exception:
PATH: NETWORKED COMPUTERS > FIREWALL > POLICIES > EDIT EXCEPTION TEMPLATE >
1. Modify the following:
• Policy exception name
• Action OfficeScan will perform on network traffic and the traffic direction
• Type of network protocol
• Port numbers for the policy exception
• Client computer IP addresses
2. Click Save.
To delete an entry:
PATH: NETWORKED COMPUTERS > FIREWALL > POLICIES > EDIT EXCEPTION TEMPLATE
1. Select the check box(es) next to the exception(s) to delete.
2. Click Delete.
7-11