OfficeScan 10 Administrator's Guide - Online Help Home - Trend Micro

Trend Micro OfficeScan 10 Service Pack 1 Administrator’s Guide
10-32
b. Next to Port, type a port that will serve as the server listening port. When the
Policy Server and OfficeScan server are on the same computer and uses the
same Web server, the port numbers are as follows:
• Apache Web server/IIS Web server on default Web site: Policy Server
and OfficeScan server share the same port
• Both on IIS Web server on virtual Web site: Policy Server default
listening port is 8081 and the SSL port is 4344. The OfficeScan server
default listening port is 8080 and the SSL port is 4343.
c. If you selected to install Policy Server on an IIS server, you can use Secured
Socket Layer (SSL). Type the SSL port number and the number of years to
keep the SSL certificate valid (the default is 3 years). If you enable SSL, this
port number will serve as the server’s listening port. The Policy Server’s
address is as follows:
• http://: or
• https://: (if you enable SSL)
11. Click Next.
12. Specify the Policy Server console password and click Next.
13. Specify the ACS Server authentication password and click Next.
14. Review the installation settings. If satisfied with the settings, click Next to start the
installation. Otherwise, click Back to go to the previous screens.
15. When the installation completes, click Finish. The OfficeScan server master
installer will continue with the rest of the OfficeScan server installation.