OfficeScan 10 Administrator's Guide - Online Help Home - Trend Micro

Trend Micro OfficeScan 10 Service Pack 1 Administrator’s Guide
8-28
5. Under Network Traffic, modify the following settings:
Normal hours
Click the radio buttons that represent the hours of the day you consider network
traffic to be normal.
Off-peak hours
Click the radio buttons that represent the hours of the day you consider network
traffic to be at its lowest.
Peak hours
Click the radio buttons that represent the hours of the day you consider network
traffic to be at its peak.
Maximum client connections
Type the maximum number of clients that can simultaneously update components
from both "other update source" and from the OfficeScan server. Type a maximum
number of clients for each of the time periods. When the maximum number of
connections is reached, a client can update components only after a current client
connection closes (due to either the completion of the update or the client response
reaching the timeout value you specified in the Timeout for client or Timeout for
Update Agent field).
6. Click OK. A prompt appears asking you to restart the OfficeScan Master Service.
Note: Only the service restarts, not the computer.
7. Click Yes to save the Server Tuner settings and restart the service. The settings take
effect immediately after restart.
Click No to save the Server Tuner settings but not restart the service. Restart the
OfficeScan Master Service or restart the OfficeScan server computer for settings to
take effect.