CNC 8055 - Operating manual (MC option) - Fagor Automation
CNC 8055 - Operating manual (MC option) - Fagor Automation
CNC 8055 - Operating manual (MC option) - Fagor Automation
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
3.<br />
WORKING WITH OPERATIONS OR CYCLES<br />
<strong>CNC</strong> <strong>8055</strong><br />
<strong>CNC</strong> <strong>8055</strong>i<br />
·<strong>MC</strong>· OPTION<br />
SOFT: V01.3X<br />
·100·<br />
Rectangular and circular pocket cycles<br />
Circular pocket cycle (level 1).<br />
<strong>Operating</strong> <strong>manual</strong><br />
The following data must be defined:<br />
The center coordinates (Xc, Yc), the pocket radius (R) and the machining conditions in Z (Zs,<br />
Z, P, I, Fz).<br />
In the roughing area, one must define the sideways penetration angle (), the milling<br />
pass () and the machining direction.<br />
In the finishing area, one must define the sideways penetration angle (), the finishing<br />
stocks ( and z), the number of finishing passes (N) and the machining direction.<br />
Circular pocket cycle (level 2).<br />
This level is the right one to machine pre-emptied pockets or crowns.<br />
The following data must be defined:<br />
The center coordinates (Xc, Yc), the inside radius (Ri) and the outside radius (Re) of the pocket<br />
and the machining conditions in Z (Zs, Z, P, I, Fz).<br />
In the roughing area, one must define the sideways penetration angle (), the milling<br />
pass () and the machining direction.<br />
In the finishing area, one must define the sideways penetration angle (), the finishing<br />
stocks ( and z), the number of finishing passes (N) and the machining direction.