CNC 8055 - Operating manual (MC option) - Fagor Automation
CNC 8055 - Operating manual (MC option) - Fagor Automation
CNC 8055 - Operating manual (MC option) - Fagor Automation
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Operating</strong> <strong>manual</strong><br />
2.7.5 Tabletop probe calibration (level 4)<br />
The new tabletop probe calibration cycle level 4 makes probe calibration easier. This reduces<br />
machine preparation time.<br />
Data to be entered<br />
[ T ] Tool number<br />
It defines the number of the tool used to calibrate the probe. If not programmed or programmed with<br />
a 0 value, the <strong>CNC</strong> will display the corresponding error message.<br />
[ D ] Tool offset number<br />
It defines the tool offset number. If not programmed, it assumes the offset number assigned to T<br />
in the tool table.<br />
[ Ds ] Approach distance<br />
Probe approaching distance in each probing movement. If not programmed or programmed with<br />
a 0 value, the <strong>CNC</strong> will display the corresponding error message.<br />
[ Dr ] Withdrawal distance<br />
Distance the tool retracts after touching the probe to take the measurement. If not programmed or<br />
programmed with a 0 value, the <strong>CNC</strong> will display the corresponding error message.<br />
[ H5 ] Searching feedrate<br />
Probe searching feedrate. If not programmed or programmed with a 0 value, the <strong>CNC</strong> will display<br />
the corresponding error message.<br />
[ F ] Measuring feedrate<br />
Measuring feedrate. If not programmed or programmed with a 0 value, the <strong>CNC</strong> will display the<br />
corresponding error message.<br />
Type of calibration<br />
Ds<br />
Programming method for probe coordinates<br />
Z<br />
Y<br />
X<br />
It indicates whether the cycle assumes the probe position defined in the machine parameters or the<br />
position defined in the cycle. To select one of them, use the cursor to select the "Machine parameters<br />
/ Programmable parameters" box and press the two-color key.<br />
Ds<br />
It indicates whether the calibration is simple or double.<br />
Simple calibration: The calibration is carried out in the 4 quadrants of the probe<br />
with the spindle that holds the tool oriented at 0º.<br />
Double calibration: The calibration is carried out twice in the 4 quadrants of the<br />
probe, one with the spindle positioned at 0º and the other with the spindle<br />
positioned at 180º. This prevents tool eccentricity errors.<br />
2.<br />
OPERATING IN JOG MODE<br />
Tool calibration<br />
<strong>CNC</strong> <strong>8055</strong><br />
<strong>CNC</strong> <strong>8055</strong>i<br />
·<strong>MC</strong>· OPTION<br />
SOFT: V01.3X<br />
·65·
Change language