CNC 8055 - Operating manual (MC option) - Fagor Automation
CNC 8055 - Operating manual (MC option) - Fagor Automation
CNC 8055 - Operating manual (MC option) - Fagor Automation
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Operating</strong> <strong>manual</strong><br />
3.7 Rectangular and circular pocket cycles<br />
This key accesses the circular pocket and rectangular pocket operations.<br />
Rectangular pocket cycle (level 1).<br />
The following data must be defined:<br />
The starting point (X, Y), the pocket dimensions (L, H) and the machining conditions in Z (Zs,<br />
Z, P, I, Fz).<br />
Also, one must define the milling pass (), the finishing stock () and the machining<br />
direction.<br />
Rectangular pocket cycle (level 2).<br />
The following data must be defined:<br />
The starting point (X, Y), the pocket dimensions (L, H), the inclination angle (), the type of corner<br />
and the machining conditions in Z (Zs, Z, P, I, Fz).<br />
In the roughing area, one must define the sideways penetration angle (), the milling<br />
pass () and the machining direction.<br />
In the finishing area, one must define the sideways penetration angle (), the finishing<br />
stocks ( and z), the number of finishing passes (N) and the machining direction.<br />
3.<br />
WORKING WITH OPERATIONS OR CYCLES<br />
Rectangular and circular pocket cycles<br />
<strong>CNC</strong> <strong>8055</strong><br />
<strong>CNC</strong> <strong>8055</strong>i<br />
·<strong>MC</strong>· OPTION<br />
SOFT: V01.3X<br />
·99·
Change language