CNC 8055 - Operating manual (MC option) - Fagor Automation
CNC 8055 - Operating manual (MC option) - Fagor Automation
CNC 8055 - Operating manual (MC option) - Fagor Automation
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
3.<br />
WORKING WITH OPERATIONS OR CYCLES<br />
<strong>CNC</strong> <strong>8055</strong><br />
<strong>CNC</strong> <strong>8055</strong>i<br />
·<strong>MC</strong>· OPTION<br />
SOFT: V01.3X<br />
·114·<br />
Drilling and center punching operations<br />
3.12 Drilling and center punching operations<br />
Center punching operation.<br />
<strong>Operating</strong> <strong>manual</strong><br />
This key accesses the drilling, center punching and bore milling operations.<br />
The following data must be defined:<br />
The machining point (X, Y), the coordinate of the safety plane (Zs), the coordinate of the part<br />
surface (Z), the dwell at the bottom (t) and the type of center punching.<br />
Drilling operation (level 1).<br />
The following data must be defined:<br />
The machining point (X, Y), the coordinate of the safety plane (Zs), the coordinate of the part<br />
surface (Z), the total machining depth (P), the drilling peck (I) and the dwell at the bottom (t).<br />
Drilling operation (level 2).<br />
It may be used to set the withdrawal distance (B) after each penetration.
Change language