CNC 8055 - Operating manual (MC option) - Fagor Automation
CNC 8055 - Operating manual (MC option) - Fagor Automation
CNC 8055 - Operating manual (MC option) - Fagor Automation
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
6.<br />
EXECUTION AND SIMULATION<br />
<strong>CNC</strong> <strong>8055</strong><br />
<strong>CNC</strong> <strong>8055</strong>i<br />
·<strong>MC</strong>· OPTION<br />
SOFT: V01.3X<br />
·150·<br />
Simulating or executing a part-program<br />
6.2.1 Simulating or executing a portion of a part-program<br />
<strong>Operating</strong> <strong>manual</strong><br />
Proceed as follows to simulate or execute a portion of a part-program:<br />
1. Press [P.PROG] to access the list of part-programs stored.<br />
2. Select the program from the left column and the operation (on the right column) from which to<br />
begin executing or simulating the part program.<br />
Press [GRAPHICS] to simulate the selected portion and [START] to execute it. When executing a<br />
portion of a program, the <strong>CNC</strong> does not execute the initial subroutine 9998, but it executes the final<br />
subroutine 9999. If the program is executed from the first operation on, it executes both subroutines.
Change language