CNC 8055 - Operating manual (MC option) - Fagor Automation
CNC 8055 - Operating manual (MC option) - Fagor Automation
CNC 8055 - Operating manual (MC option) - Fagor Automation
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SAFETY CONDITIONS<br />
Read the following safety measures in order to prevent harming people or damage to this product and those<br />
products connected to it.<br />
This unit may only be repaired by authorized personnel at <strong>Fagor</strong> <strong>Automation</strong>.<br />
<strong>Fagor</strong> <strong>Automation</strong> shall not be held responsible of any physical damage or defective unit resulting from not<br />
complying with these basic safety regulations.<br />
PRECAUTIONS AGAINST PERSONAL DAMAGE<br />
Interconnection of modules.<br />
Use the connection cables provided with the unit.<br />
Use proper Mains AC power cables<br />
To avoid risks, use only the Mains AC cables recommended for this unit.<br />
Avoid electrical overloads.<br />
In order to avoid electrical discharges and fire hazards, do not apply electrical voltage outside the range<br />
selected on the rear panel of the central unit.<br />
Ground connection.<br />
In order to avoid electrical discharges, connect the ground terminals of all the modules to the main<br />
ground terminal. Before connecting the inputs and outputs of this unit, make sure that all the grounding<br />
connections are properly made.<br />
Before powering the unit up, make sure that it is connected to ground.<br />
In order to avoid electrical discharges, make sure that all the grounding connections are properly made.<br />
Do not work in humid environments.<br />
In order to avoid electrical discharges, always work under 90% of relative humidity (non-condensing)<br />
and 45 ºC (113º F).<br />
Do not work in explosive environments.<br />
In order to avoid risks or damages, do no work in explosive environments.<br />
<strong>CNC</strong> <strong>8055</strong><br />
<strong>CNC</strong> <strong>8055</strong>i<br />
·11·