CNC 8055 - Operating manual (MC option) - Fagor Automation
CNC 8055 - Operating manual (MC option) - Fagor Automation
CNC 8055 - Operating manual (MC option) - Fagor Automation
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
3.<br />
WORKING WITH OPERATIONS OR CYCLES<br />
<strong>CNC</strong> <strong>8055</strong><br />
<strong>CNC</strong> <strong>8055</strong>i<br />
·102·<br />
Rectangular and circular pocket cycles<br />
·<strong>MC</strong>· OPTION<br />
SOFT: V01.3X<br />
<strong>Operating</strong> <strong>manual</strong><br />
Milling pass (). Finishing stock on the side walls () and at the bottom (z). Number<br />
of finishing passes (N).<br />
Place the cursor in the window for the finishing operation, key in the desired value and press<br />
[ENTER].<br />
Sideways penetration angles (, ).<br />
In the rectangular pocket, the penetration is carried out from the pocket center following the first<br />
machining path. The path is followed as many times as needed so it ends back in the center of the<br />
pocket.<br />
In the circular pocket, the penetration is carried out from the pocket center following a helical path<br />
with a radius equal to that of the tool and keeping the machining direction. The penetration (in feed)<br />
always ends in the center of the pocket.<br />
Place the cursor in the corresponding window, roughing or finishing operation, key in the desired<br />
value and press [ENTER].
Change language