CNC 8055 - Operating manual (MC option) - Fagor Automation
CNC 8055 - Operating manual (MC option) - Fagor Automation
CNC 8055 - Operating manual (MC option) - Fagor Automation
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
3.<br />
WORKING WITH OPERATIONS OR CYCLES<br />
Multiple positioning<br />
<strong>CNC</strong> <strong>8055</strong><br />
<strong>CNC</strong> <strong>8055</strong>i<br />
·<strong>MC</strong>· OPTION<br />
SOFT: V01.3X<br />
·118·<br />
3.13 Multiple positioning<br />
<strong>Operating</strong> <strong>manual</strong><br />
Some cycles may be carried out in the tool position or may be associated a multiple positioning so<br />
the cycle may be repeated in several locations. Multiple positioning may be associated with the<br />
following cycles.<br />
Boring, reaming, tapping, drilling and center punching operations.<br />
2D and 3D pockets.<br />
Bosses.<br />
Use the following keys to select multiple positioning. The positioning moves may be selected with<br />
each one of the following keys:<br />
Multiple positioning in several locations.<br />
Multiple positioning in a straight line.<br />
Multiple positioning in an arc.<br />
Multiple positioning in a rectangular pattern.<br />
Multiple positioning in a grid pattern.<br />
When using one of these keys, the <strong>CNC</strong> selects the corresponding positioning and changes the<br />
display on the screen. The <strong>CNC</strong> keeps the lamp for the selected operation (pocket, boss, boring,<br />
reaming, etc.) on and the bottom of the screen shows the data for that operation.<br />
Associating a multiple positioning with a cycle<br />
A multiple positioning may be associated with a cycle as follows:<br />
1. Definition of the machining cycle, including the position of the starting point.<br />
2. Selection of the type of positioning to be associated with.<br />
3. Programming of the different points of the positioning.<br />
The cycle assumes as first positioning point the starting point of the machining operation. This<br />
point may be modified when defining the positioning.<br />
In 2D and 3D pockets, the reference points for the positioning must be the starting point of the<br />
outside profile.<br />
To de-select a cycle and return to the standard screen, press the key for the selected cycle (the one<br />
with the lamp on) or the [ESC] key.<br />
Multiple positioning in pockets and bosses<br />
The screens of the pockets and bosses will indicate with icons which positioning they have<br />
associated or whether they are alone.<br />
In the positioning, an icon will show the pocket or boss to be repeated and the bottom screen will<br />
give information on its geometry (except in profile pockets). The starting position of rectangular<br />
pockets and bosses may be changed; the positioning movements will be different depending on<br />
whether the starting point is at the vertex or in the center.