CNC 8055 - Operating manual (MC option) - Fagor Automation
CNC 8055 - Operating manual (MC option) - Fagor Automation
CNC 8055 - Operating manual (MC option) - Fagor Automation
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
WORKING WITH OPERATIONS OR<br />
CYCLES<br />
Use the following <strong>CNC</strong> keys to select the different machining operations or cycles.<br />
User cycles<br />
3<br />
When pressing [PCALL], the <strong>CNC</strong> shows all the user cycles defined by the machine<br />
manufacturer with the WGDRAW application.<br />
The user cycle is edited like any other standard cycle of the <strong>MC</strong> mode. Once all the required data<br />
has been defined, the user can simulate or execute the cycle like any other standard cycle of the<br />
<strong>MC</strong> mode.<br />
Cycles or operations of the <strong>CNC</strong><br />
When pressing any other key, the <strong>CNC</strong> selects the corresponding standard machining cycle,<br />
changes the display and turns on the lamp of the key that has been pressed (indicating the selected<br />
type.<br />
Standard machining operations or cycles may be selected with each one of the following keys:<br />
Boring. Surface milling and slot milling.<br />
Reaming. Pocket with profile (2D and 3D).<br />
Tapping. Rectangular and circular boss.<br />
Drilling and center punching. Rectangular and circular pocket.<br />
Profile milling. Positioning.<br />
When the machining operation or cycle has several levels, [LEVEL CYCLE] must be<br />
pressed to select the desired cycle level.<br />
<strong>CNC</strong> <strong>8055</strong><br />
<strong>CNC</strong> <strong>8055</strong>i<br />
·<strong>MC</strong>· OPTION<br />
SOFT: V01.3X<br />
·71·