CNC 8055 - Operating manual (MC option) - Fagor Automation
CNC 8055 - Operating manual (MC option) - Fagor Automation
CNC 8055 - Operating manual (MC option) - Fagor Automation
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Operating</strong> <strong>manual</strong><br />
2.5.6 Feed handwheel<br />
Usually, when making a part for the first time, the machine feedrate is controlled by means of the<br />
feedrate override switch.<br />
From this version on, it is also possible to use the machine handwheels to control that feedrate. This<br />
way, the machining feedrate will depend on how fast the handwheel is turned.<br />
i<br />
This feature must be managed from the PLC. This feature is usually activated and deactivated by<br />
means of an external push-button or a key configured for that purpose.<br />
The following <strong>CNC</strong> variables return the number of pulses the handwheel has turned.<br />
HANPF Provides the number of pulses of the 1st handwheel.<br />
HANPS Provides the number of pulses of the 2nd handwheel.<br />
HANPT Provides the number of pulses of the 3rd handwheel.<br />
HANPFO Provides the number of pulses of the 4th handwheel.<br />
2.<br />
OPERATING IN JOG MODE<br />
Jog movement<br />
<strong>CNC</strong> <strong>8055</strong><br />
<strong>CNC</strong> <strong>8055</strong>i<br />
·<strong>MC</strong>· OPTION<br />
SOFT: V01.3X<br />
·47·
Change language