CNC 8055 - Operating manual (MC option) - Fagor Automation
CNC 8055 - Operating manual (MC option) - Fagor Automation
CNC 8055 - Operating manual (MC option) - Fagor Automation
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2.<br />
OPERATING IN JOG MODE<br />
Home search<br />
<strong>CNC</strong> <strong>8055</strong><br />
<strong>CNC</strong> <strong>8055</strong>i<br />
·<strong>MC</strong>· OPTION<br />
SOFT: V01.3X<br />
·40·<br />
2.3 Home search<br />
Home search may be done in 2 ways:<br />
Homing all the axes.<br />
Homing a single axis.<br />
Homing all the axes<br />
To home all the axes, press [ZERO].<br />
<strong>Operating</strong> <strong>manual</strong><br />
The <strong>CNC</strong> requests confirmation of the command (text 48 of program 999997). Press [START], the<br />
<strong>CNC</strong> will execute the home search subroutine defined by the OEM in general machine parameters<br />
P34 (REFPSUB).<br />
i<br />
After searching home this way, the <strong>CNC</strong> will maintain the part zero or zero offset active at the time.<br />
A home search subroutine (general machine parameter P34 other than 0) must be defined when using<br />
this method. Otherwise, the <strong>CNC</strong> will display the corresponding error.<br />
Homing a single axis<br />
To home a single axis, press the key of the desired axis and the key for home search.<br />
In either case, the <strong>CNC</strong> requests confirmation of the command (text 48 of program 999997).<br />
i<br />
It homes the X axis.<br />
It homes the Y axis.<br />
It homes the Z axis.<br />
After searching home this way, the <strong>CNC</strong> will not maintain the part zero or zero offset active at the time<br />
and assumes the machine reference zero as the new part zero.
Change language