CNC 8055 - Operating manual (MC option) - Fagor Automation

CNC 8055
CNC 8055i
·6·
About the product
SOFTWARE OPTIONS OF THE 8055 CNC AND 8055I CNC
Model
GP M MC MCO EN T TC TCO
Number of axes with standard software 4 4 4 4 3 2 2 2
Number of axes with optional software 7 7 7 7 ----- 4 or 7 4 or 7 4 or 7
Electronic threading ----- Stand Stand Stand Stand Stand Stand Stand
Tool magazine management: ----- Stand Stand Stand ----- Stand Stand Stand
Machining canned cycles ----- Stand Stand ----- Stand Stand Stand -----
Multiple machining ----- Stand Stand ----- Stand ----- ----- -----
Solid graphics ----- Stand Stand Stand ----- Stand Stand Stand
Rigid tapping ----- Stand Stand Stand Stand Stand Stand Stand
Tool live monitoring ----- Opt Opt Opt Stand Opt Opt Opt
Probing canned cycles ----- Opt Opt Opt Stand Opt Opt Opt
DNC Stand Stand Stand Stand Stand Stand Stand Stand
COCOM version Opt Opt Opt Opt ----- Opt Opt Opt
Profile editor Stand Stand Stand Stand ----- Stand Stand Stand
Tool radius compensation Stand Stand Stand Stand Stand Stand Stand Stand
Tangential control Opt Opt Opt Opt ----- Opt Opt Opt
Retracing ----- Opt Opt Opt Stand Opt Opt Opt
Setup assistance Stand Stand Stand Stand Stand Stand Stand Stand
Irregular pockets with islands ----- Stand Stand Stand ----- ----- ----- -----
TCP transformation ----- Opt Opt Opt ----- ----- ----- -----
C axis (on Lathe) ----- ----- ----- ----- ----- Opt Opt Opt
Y axis (on Lathe) ----- ----- ----- ----- ----- Opt Opt Opt
Telediagnosis Opt Opt Opt Opt Stand Opt Opt Opt