CNC 8055 - Operating manual (MC option) - Fagor Automation
CNC 8055 - Operating manual (MC option) - Fagor Automation
CNC 8055 - Operating manual (MC option) - Fagor Automation
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Operating</strong> <strong>manual</strong><br />
6.4.1 Tool inspection<br />
The PLC mark M5050 "TOOLINSP" determines when tool inspection is enabled.<br />
TOOLINSP=0 Tool inspection is possible after pressing [STOP].<br />
TOOLINSP=1 Pressing [STOP] interrupts the execution of the program. To move the<br />
axes and do a tool inspection, press the [T] key once the execution of<br />
the program has been interrupted.<br />
Once tool inspection has been selected, it is possible:<br />
To move the axes to the tool change point.<br />
To select another tool.<br />
To modify the tool values.<br />
To resume program execution.<br />
To move the axes to the tool change point.<br />
To move the axes with the handwheels or the jog keypad to the point where the tool will be changed.<br />
To select another tool.<br />
The standard screen of the <strong>MC</strong> mode must be selected in order to be able to make a tool change.<br />
Press the [T] key. The <strong>CNC</strong> highlights the tool number.<br />
Type in the number of the tool to be selected and press [START] so the <strong>CNC</strong> selects the<br />
new tool. The <strong>CNC</strong> will manage the tool change.<br />
Modifying the tool values (dimensions and geometry).<br />
Press the key associated with tool calibration. The <strong>CNC</strong> shows the screen for tool<br />
calibration.<br />
It is possible to modify the dimensions of the tool (offsets I, K to compensate for wear) or the values<br />
for tool geometry.<br />
Press the [ESC] key to exit this screen and go back to the previous one (still in tool inspection).<br />
Resuming program execution.<br />
Press the [START] key to resume program execution. The <strong>CNC</strong> will reposition the tool<br />
by moving it to the point where tool inspection began.<br />
There may be 2 cases; either only one axis moved or several did.<br />
Only one axis moved.<br />
The <strong>CNC</strong> repositions it and resumes the execution.<br />
Several axes moved.<br />
The <strong>CNC</strong> will show a window with the following <strong>option</strong>s to choose the order the axes will be<br />
repositioned.<br />
PLANE The axes of the X-Y plane move at the same time.<br />
Y-X When moving the axes of the plane, the Y axis moves first and then the X.<br />
X-Y When moving the axes of the plane, the X axis moves first and then the Y.<br />
Z Move the Z axis.<br />
For example, to move first the Z axis, then the Y and finally the X axis, select [Z] [Y-X].<br />
6.<br />
EXECUTION AND SIMULATION<br />
Execution mode<br />
<strong>CNC</strong> <strong>8055</strong><br />
<strong>CNC</strong> <strong>8055</strong>i<br />
·<strong>MC</strong>· OPTION<br />
SOFT: V01.3X<br />
·153·
Change language