CNC 8055 - Operating manual (MC option) - Fagor Automation
CNC 8055 - Operating manual (MC option) - Fagor Automation
CNC 8055 - Operating manual (MC option) - Fagor Automation
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
3.<br />
WORKING WITH OPERATIONS OR CYCLES<br />
Tapping operation<br />
<strong>CNC</strong> <strong>8055</strong><br />
<strong>CNC</strong> <strong>8055</strong>i<br />
·<strong>MC</strong>· OPTION<br />
SOFT: V01.3X<br />
·112·<br />
3.11.2 Definition of data (thread milling)<br />
Coordinates of the machining point.<br />
<strong>Operating</strong> <strong>manual</strong><br />
The coordinates are defined one by one. After placing the cursor on the coordinates of the axes to<br />
be defined, the value is entered in one of the following ways.<br />
Entering the value <strong>manual</strong>ly. Key in the desired value and press [ENTER].<br />
Assign the current machine position.<br />
Jog the axis with the handwheel or the JOG keys up to the desired point. Press [RECALL] so<br />
the selected data assumes the value shown in the top right window and press [ENTER].<br />
The top right window shows the tool position at all times.<br />
Type of threading<br />
[ Zs ] Safety coordinate<br />
Defines the safety plane coordinate along the Z axis.<br />
[ Z ] Part surface<br />
Defines the Z coordinate of the part surface.<br />
[ P ] Machining depth<br />
Defines the total milling depth. If programmed with a 0 value, the <strong>CNC</strong> will display the corresponding<br />
error message.<br />
[ ] Thread diameter<br />
Defines the nominal diameter of the thread If not programmed or programmed with a 0 value, the<br />
<strong>CNC</strong> will display the corresponding error message.<br />
[ K ] Thread depth<br />
It defines the distance between the crest and the root of the thread. If not programmed, the <strong>CNC</strong><br />
issues the corresponding error.<br />
[ B ] Thread pitch<br />
Defines the thread pitch. If not programmed or programmed with a 0 value, the <strong>CNC</strong> will display the<br />
corresponding error message.<br />
[ Ds ] Approach distance<br />
Approach distance to the thread entry. If not programmed or programmed with a 0 value, it will enter<br />
the thread from the center of the hole.<br />
Thread entry angle<br />
Defines the type of threading to be carried out (inside or outside).<br />
Angle (in degrees) of the segment formed by the center of the hole and the thread entry point with<br />
respect to the abscissa axis. If not programmed, a value of 0 is assumed.
Change language