CNC 8055 - Operating manual (MC option) - Fagor Automation
CNC 8055 - Operating manual (MC option) - Fagor Automation
CNC 8055 - Operating manual (MC option) - Fagor Automation
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
MATERIAL RETURNING TERMS<br />
When sending the central nit or the remote modules, pack them in its original package and packaging<br />
material. If the original packaging material is not available, pack it as follows:<br />
1. Get a cardboard box whose three inside dimensions are at least 15 cm (6 inches) larger than those<br />
of the unit. The cardboard being used to make the box must have a resistance of 170 kg. (375 pounds).<br />
2. Attach a label indicating the owner of the unit, person to contact, type of unit and serial number.<br />
3. In case of failure, also indicate the symptom and a short description.<br />
4. Wrap the unit in a polyethylene roll or similar material to protect it.<br />
5. When sending the central unit, protect especially the screen.<br />
6. Pad the unit inside the cardboard box with polyurethane foam on all sides.<br />
7. Seal the cardboard box with packing tape or industrial staples.<br />
<strong>CNC</strong> <strong>8055</strong><br />
<strong>CNC</strong> <strong>8055</strong>i<br />
·17·
Change language