CNC 8055 - Operating manual (MC option) - Fagor Automation

More documents

Recommendations

Info

2. OPERATING IN JOG MODE Jog movement CNC 8055 CNC 8055i ·MC· OPTION SOFT: V01.3X ·44· 2.5.4 Path-jog Operating manual The "path jog" mode acts when the switch is in one of the continuous or incremental jog positions. This feature may be used to act upon the jog keys of an axis to move both axes of the plane at the same time for chamfering (straight sections) and rounding (curved sections). The CNC assumes as "Path jog" the keys associated with the X axis. i This feature must be managed from the PLC. This feature is usually activated and deactivated by means of an external push-button or a key configured for that purpose, as well as the selection of the type of path. The next example uses the [O2] key to activate and deactivate the path-jog mode and the [O3] key to indicate the type of movement. Activate / deactivate the path-jog mode. DFU B29 R561 = CPL M5054 It selects the type of movement, straight section or arc section. DFU B31 R561 = CPL M5053 While in jog mode and having selected path-jog, the CNC shows the following information: For a linear movement (top figure), the path angle must be defined and for an arc (bottom figure), the center coordinates must be indicated. To define these variables, press the [F] key and then one of these keys: [] [] [] []. Operation in path-jog mode The "path jog" mode is only available with the X axis keys. When pressing one of the keys associated with the X axis, the CNC behaves as follows: Switch position Path-jog Type of movement Continuous jog OFF Only the axis and in the indicated direction ON Both axes in the indicated direction and along the indicated path Incremental jog OFF Only the axis, the selected distance and in the indicated direction ON Both axes, the selected distance and in the indicated direction, but along the indicated path Handwheel It ignores the keys. The rest of the jog keys always work in the same way, whether "path jog" is on or off. The rest of the keys move only the axis and in the indicated direction. The movements in path-jog may be aborted by pressing the [STOP] key or setting the jog switch to one of the handwheel positions.
Operating manual Considerations about the jog movements This mode assumes as axis feedrate the one selected in jog mode and it will also be affected by the feedrate override switch. If F0 is selected, it assumes the one indicated by machine parameter "JOGFEED (P43)". This mode ignores the rapid jog key. Path-jog movements respect the travel limits and the work zones. 2. OPERATING IN JOG MODE Jog movement CNC 8055 CNC 8055i ·MC· OPTION SOFT: V01.3X ·45·
Page 1 and 2: CNC 8055 ·MC· Operating manual Re
Page 3 and 4: Operating manual INDEX About the pr
Page 5 and 6: ABOUT THE PRODUCT BASIC CHARACTERIS
Page 7: DECLARATION OF CONFORMITY The manuf
Page 10 and 11: CNC 8055 CNC 8055i ·10· Version h
Page 12 and 13: CNC 8055 CNC 8055i ·12· Safety co
Page 14 and 15: CNC 8055 CNC 8055i ·14· Safety co
Page 16 and 17: CNC 8055 CNC 8055i ·16· Warranty
Page 18 and 19: CNC 8055 CNC 8055i ·18· Material
Page 20 and 21: CNC 8055 CNC 8055i ·20· Additiona
Page 22 and 23: CNC 8055 CNC 8055i ·22· Fagor doc
Page 24 and 25: 1. GENERAL CONCEPTS Keyboard CNC 80
Page 26 and 27: 1. GENERAL CONCEPTS General concept
Page 28 and 29: 1. GENERAL CONCEPTS General concept
Page 30 and 31: 1. GENERAL CONCEPTS CNC 8055 CNC 80
Page 32 and 33: 2. OPERATING IN JOG MODE Introducti
Page 40 and 41: 2. OPERATING IN JOG MODE Home searc
Page 42 and 43: 2. OPERATING IN JOG MODE Jog moveme
Page 50 and 51: 2. OPERATING IN JOG MODE Tool contr
Page 52 and 53: 2. OPERATING IN JOG MODE Tool contr
Page 54 and 55: 2. OPERATING IN JOG MODE Tool calib
Page 68 and 69: 2. OPERATING IN JOG MODE CNC 8055 C
Page 70 and 71: 2. OPERATING IN JOG MODE ISO manage
Page 72 and 73: 3. WORKING WITH OPERATIONS OR CYCLE
Page 94 and 95:
3. WORKING WITH OPERATIONS OR CYCLE
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Page 122 and 123:
Page 124 and 125:
Page 126 and 127:
Page 128 and 129:
4. OPERATING IN ISO MODE CNC 8055 C
Page 130 and 131:
4. OPERATING IN ISO MODE CNC 8055 C
Page 132 and 133:
4. OPERATING IN ISO MODE Programmin
Page 134 and 135:
5. SAVING PROGRAMS CNC 8055 CNC 805
Page 136 and 137:
Page 138 and 139:
Page 140 and 141:
Page 142 and 143:
Page 144 and 145:
Page 146 and 147:
Page 148 and 149:
6. EXECUTION AND SIMULATION CNC 805
Page 150 and 151:
6. EXECUTION AND SIMULATION CNC 805
Page 152 and 153:
6. EXECUTION AND SIMULATION Executi
Page 154 and 155:
6. EXECUTION AND SIMULATION Graphic
Page 156 and 157:
6. EXECUTION AND SIMULATION Graphic
Page 158:
6. CNC 8055 CNC 8055i ·MC· OPTION
show all

CNC 8055 - Operating manual (MC option) - Fagor Automation

Create successful ePaper yourself

Delete template?

Save as template?