CNC 8055 - Operating manual (MC option) - Fagor Automation
CNC 8055 - Operating manual (MC option) - Fagor Automation
CNC 8055 - Operating manual (MC option) - Fagor Automation
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
3.<br />
WORKING WITH OPERATIONS OR CYCLES<br />
<strong>CNC</strong> <strong>8055</strong><br />
<strong>CNC</strong> <strong>8055</strong>i<br />
·<strong>MC</strong>· OPTION<br />
SOFT: V01.3X<br />
·96·<br />
Rectangular and circular boss cycles<br />
3.6 Rectangular and circular boss cycles<br />
Rectangular boss cycle.<br />
<strong>Operating</strong> <strong>manual</strong><br />
The following data must be defined:<br />
The starting point (X1, Y1), the dimensions of the boss (L, H), the inclination angle (), the<br />
amount of stock to be removed (Q), the type of corner and the machining conditions in Z (Zs,<br />
Z, P, I, Fz).<br />
Circular boss cycle.<br />
This key accesses the circular boss and rectangular boss operations.<br />
In the roughing area, define the milling pass () and the machining direction.<br />
In the finishing area, define the finishing stocks ( and z), the number of finishing<br />
passes and the machining direction.<br />
The following data must be defined:<br />
The center coordinates, (Xc, Yc), the radius of the boss (R), the amount of stock to be removed<br />
(Q) and the machining conditions in Z (Zs, Z, P, I, Fz).<br />
In the roughing area, define the milling pass () and the machining direction.<br />
In the finishing area, define the finishing stocks ( and z), the number of finishing<br />
passes and the machining direction.