CNC 8055 - Operating manual (MC option) - Fagor Automation
CNC 8055 - Operating manual (MC option) - Fagor Automation
CNC 8055 - Operating manual (MC option) - Fagor Automation
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
PROTECTIONS OF THE UNIT ITSELF (<strong>8055</strong>)<br />
"Axes" and "Inputs/Outputs" modules.<br />
All the digital inputs and outputs have galvanic isolation via optocouplers between the <strong>CNC</strong> circuitry<br />
and the outside.<br />
They are protected by an external fast fuse (F) of 3.15 A 250V against overvoltage of the external power<br />
supply (over 33 Vdc) and against reverse connection of the power supply.<br />
Monitor.<br />
The type of protection fuse depends on the type of monitor. See identification label of the unit itself.<br />
Central Unit.<br />
It has a 4 A 250V external fast fuse (F).<br />
PROTECTIONS OF THE UNIT ITSELF (<strong>8055</strong>I)<br />
OUT IN<br />
X7<br />
X9<br />
X2<br />
X10<br />
X3<br />
X11<br />
X4<br />
Inputs-Outputs.<br />
All the digital inputs and outputs have galvanic isolation via optocouplers between the <strong>CNC</strong> circuitry<br />
and the outside.<br />
X12<br />
X5<br />
X1<br />
X8<br />
+24V<br />
0V<br />
X13<br />
X6<br />
FUSIBLE FUSE<br />
Safety conditions<br />
<strong>CNC</strong> <strong>8055</strong><br />
<strong>CNC</strong> <strong>8055</strong>i<br />
·13·
Change language