CNC 8055 - Operating manual (MC option) - Fagor Automation
CNC 8055 - Operating manual (MC option) - Fagor Automation
CNC 8055 - Operating manual (MC option) - Fagor Automation
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Operating</strong> <strong>manual</strong><br />
3.9 Boring operation<br />
This key accesses the boring operations.<br />
Boring operation (level 1).<br />
The following data must be defined:<br />
The machining point (X, Y), the coordinate of the safety plane (Zs), the coordinate of the part<br />
surface (Z), the total machining depth (P) and the dwell at the bottom (t).<br />
Boring operation (level 2).<br />
This level is only available when using spindle orientation. This level may be used, after the quail<br />
has penetrated, to orient the spindle, retract the quail before the exit movement, thus preventing the<br />
part from scratching.<br />
The following data must be defined:<br />
The machining point (X, Y), the coordinate of the safety plane (Zs), the coordinate of the part<br />
surface (Z), the total machining depth (P) and the dwell at the bottom (t) and the data for quail<br />
orientation and retraction (s, x, y).<br />
3.<br />
WORKING WITH OPERATIONS OR CYCLES<br />
Boring operation<br />
<strong>CNC</strong> <strong>8055</strong><br />
<strong>CNC</strong> <strong>8055</strong>i<br />
·<strong>MC</strong>· OPTION<br />
SOFT: V01.3X<br />
·105·