CNC 8055 - Operating manual (MC option) - Fagor Automation
CNC 8055 - Operating manual (MC option) - Fagor Automation
CNC 8055 - Operating manual (MC option) - Fagor Automation
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Operating</strong> <strong>manual</strong><br />
3.3 Profile milling operation<br />
This cycle may be defined in two ways:<br />
Level 1.<br />
The following data must be defined:<br />
The starting point (X1, Y1), the intermediate points (P1 through P12), the last point (Xn, Yn) and<br />
the machining conditions in Z (Zs, Z, P, I, Fz).<br />
Also, in the area for roughing operation data, it must be defined whether the milling operation<br />
is carried out with or without tool compensation.<br />
Level 2.<br />
This key accesses the profile milling operation.<br />
The following data must be defined:<br />
The starting point (X, Y), the "Profile program" number and the machining conditions in Z (Zs,<br />
Z, P, I, Fz).<br />
Also, in the area for roughing operation data, it must be defined whether the milling operation<br />
is carried out with or without tool compensation.<br />
3.<br />
WORKING WITH OPERATIONS OR CYCLES<br />
Profile milling operation<br />
<strong>CNC</strong> <strong>8055</strong><br />
<strong>CNC</strong> <strong>8055</strong>i<br />
·<strong>MC</strong>· OPTION<br />
SOFT: V01.3X<br />
·79·
Change language