CNC 8055 - Operating manual (MC option) - Fagor Automation
CNC 8055 - Operating manual (MC option) - Fagor Automation
CNC 8055 - Operating manual (MC option) - Fagor Automation
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Operating</strong> <strong>manual</strong><br />
1.3 Power-up<br />
On power-up and after the keystroke sequence [SHIFT] [RESET], the <strong>CNC</strong> shows<br />
"page 0" defined by the manufacturer; if there is no "page 0", it shows the standard<br />
screen of the work mode. Press any key to access the work mode.<br />
The standard screen of the <strong>MC</strong> mode is the following:<br />
There are two work modes; <strong>MC</strong> mode and M mode. Press the key sequence<br />
[SHIFT] [ESC] to toggle from one mode to the other.<br />
The <strong>CNC</strong> setup must be done in M mode.<br />
Likewise, some errors must be eliminated in M mode.<br />
1.<br />
GENERAL CONCEPTS<br />
Power-up<br />
<strong>CNC</strong> <strong>8055</strong><br />
<strong>CNC</strong> <strong>8055</strong>i<br />
·<strong>MC</strong>· OPTION<br />
SOFT: V01.3X<br />
·29·
Change language