CNC 8055 - Operating manual (MC option) - Fagor Automation

Operating manual
3.13.5 Multiple positioning in a grid pattern
Data definition.
This key associates this positioning with the active operation.
The positioning may be defined in 3 ways. To select the desired type, place the cursor
over the icon and press the two-color key. The icon shows the selected option and the
total number of options available.
1) Coordinates of the starting point (X1, Y1)
X and Y lengths (Lx, Ly)
X and Y distances between machining operations. (Ix, Iy)
Rotation angle ()
Angle between paths (:
2) Coordinates of the starting point (X1, Y1)
X and Y lengths (Lx, Ly)
Number of machining operations on X and Y (Nx, Ny)
Rotation angle ()
Angle between paths (:
3) Coordinates of the starting point (X1, Y1)
X and Y distances between machining operations. (Ix, Iy)
Number of machining operations on X and Y (Nx, Ny)
Rotation angle ()
Angle between paths (:
The coordinates are defined one by one. After placing the cursor on the coordinates of the axes to
be defined, the value is entered in one of the following ways.
Entering the value manually. Key in the desired value and press [ENTER].
Assign the current machine position.
Jog the axis with the handwheel or the JOG keys up to the desired point. Press [RECALL] so
the selected data assumes the value shown in the top right window and press [ENTER].
The top right window shows the tool position at all times.
To define the rest of the values (Lx, Ly, Ix, Iy, , , Nx, Ny), go to the corresponding window, key
in the desired value and press [ENTER].
3.
WORKING WITH OPERATIONS OR CYCLES
Multiple positioning
CNC 8055
CNC 8055i
·MC· OPTION
SOFT: V01.3X
·125·