CNC 8055 - Operating manual (MC option) - Fagor Automation
CNC 8055 - Operating manual (MC option) - Fagor Automation
CNC 8055 - Operating manual (MC option) - Fagor Automation
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
5.<br />
SAVING PROGRAMS<br />
<strong>CNC</strong> <strong>8055</strong><br />
<strong>CNC</strong> <strong>8055</strong>i<br />
·<strong>MC</strong>· OPTION<br />
SOFT: V01.3X<br />
·144·<br />
Modify a part-program<br />
5.7.3 Move an operation to another position<br />
To move an operation to another position, proceed as follows:<br />
1. Select, with the pointer, the operation to be moved from the right column.<br />
Example:<br />
<strong>Operating</strong> <strong>manual</strong><br />
2. Press the two-color key.<br />
The <strong>CNC</strong> will highlight that operation.<br />
3. Place the cursor on the operation after which the operation is to be placed and press<br />
[ENTER].<br />
Current program Desired program<br />
Bidirectional surface milling in X Bidirectional surface milling in X<br />
Rectangular pocket Circular pocket<br />
Circular pocket Drilling 1 + linear positioning<br />
Drilling 1 + linear positioning Drilling 1 + grid pattern positioning<br />
Drilling 1 + grid pattern positioning Threading + Grid pattern positioning<br />
Threading + Grid pattern positioning Rectangular pocket<br />
Profile 1 Profile 1<br />
Select the "Rectangular pocket" operation and press the two-color key. Then position the cursor on<br />
the "Threading + Grid pattern positioning" operation and press [ENTER].