CNC 8055 - Operating manual (MC option) - Fagor Automation
CNC 8055 - Operating manual (MC option) - Fagor Automation
CNC 8055 - Operating manual (MC option) - Fagor Automation
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2.<br />
OPERATING IN JOG MODE<br />
Introduction<br />
<strong>CNC</strong> <strong>8055</strong><br />
<strong>CNC</strong> <strong>8055</strong>i<br />
·<strong>MC</strong>· OPTION<br />
SOFT: V01.3X<br />
·34·<br />
2.1.2 Special screen of the <strong>MC</strong> mode<br />
The special screen of the <strong>MC</strong> mode offers the following data:<br />
1. Clock.<br />
2. This window may show the following data:<br />
SBK when “single block” execution mode is selected.<br />
DNC when the DNC mode is active.<br />
P..... number of the program currently selected.<br />
Message "In position" - "Execution" - "Interrupted" - "RESET".<br />
PLC messages.<br />
3. This window shows the <strong>CNC</strong> messages.<br />
4. This window shows the lines of the program currently selected.<br />
5. The X, Y, Z axes have the following fields:<br />
The spindle (S) has the following fields:<br />
The auxiliary axes only show the real current position of the axis.<br />
<strong>Operating</strong> <strong>manual</strong><br />
COMANDO It indicates the programmed coordinate or position that the axis<br />
must reach.<br />
ACTUAL It indicates the actual (current) position of the axis.<br />
REST It indicates the distance which is left to run to the programmed<br />
coordinate.<br />
FOLLOWING ERROR Difference between the theoretical value and the real value of<br />
the position.<br />
THEORETICAL Programmed theoretical S speed.<br />
RPM Speed in rpm.<br />
M/MIN Speed in meters per minute.<br />
FOLLOWING ERROR When working with spindle orientation (M19), it indicates the<br />
difference between the theoretical and the real speeds.
Change language