CNC 8055 - Operating manual (MC option) - Fagor Automation

3.
WORKING WITH OPERATIONS OR CYCLES
Multiple positioning
CNC 8055
CNC 8055i
·MC· OPTION
SOFT: V01.3X
·122·
3.13.3 Multiple positioning in an arc
This key associates this positioning with the active operation.
Multiple positioning in an arc (level 1).
Operating manual
The positioning may be defined in 6 ways. To select the desired type, place the cursor
over the icon and press the two-color key. The icon shows the selected option and the
total number of options available.
1) Coordinates of the starting point (X1, Y1)
Center coordinates (Xc, Yc)
Angle of the last point ()
Angular distance between machining operations (:
2) Coordinates of the starting point (X1, Y1)
Radius (R)
Angle of the starting point ()
Angle of the last point ()
Angular distance between machining operations (:
3) Coordinates of the starting point (X1, Y1)
Center coordinates (Xc, Yc)
Number of points to machine (N)
Angle of the last point ()
4) Coordinates of the starting point (X1, Y1)
Center coordinates (Xc, Yc)
Number of points to machine (N)
Angular distance between machining operations (:
5) Coordinates of the starting point (X1, Y1)
Radius (R)
Angle of the starting point ()
Number of points to machine (N)
Angle of the last point ()
6) Coordinates of the starting point (X1, Y1)
Radius (R)
Angle of the starting point ()
Number of points to machine (N)
Angular distance between machining operations (: