CNC 8055 - Operating manual (MC option) - Fagor Automation
CNC 8055 - Operating manual (MC option) - Fagor Automation
CNC 8055 - Operating manual (MC option) - Fagor Automation
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
2.<br />
OPERATING IN JOG MODE<br />
Jog movement<br />
<strong>CNC</strong> <strong>8055</strong><br />
<strong>CNC</strong> <strong>8055</strong>i<br />
·<strong>MC</strong>· OPTION<br />
SOFT: V01.3X<br />
·42·<br />
2.5 Jog movement<br />
<strong>Operating</strong> <strong>manual</strong><br />
When making a move in <strong>manual</strong>, both in jog and with handwheels, the moving axis appears in<br />
reverse video.<br />
With gantry axes, only the master axis is highlighted.<br />
With a path handwheel, no axis is highlighted; but it is in path-jog.<br />
2.5.1 Moving an axis to a particular position (coordinate)<br />
The movements of axes to a particular coordinate are made one at a time as follows.<br />
[target coordinate]<br />
[target coordinate]<br />
[target coordinate]<br />
2.5.2 Incremental movement<br />
Turn the JOG switch to one of the JOG positions.<br />
The incremental movement must be made one axis at a time. To do that, press the JOG keys for<br />
the direction of the axis to be jogged.<br />
Every time a key is pressed, the corresponding axis moves the amount set by the switch. This<br />
movement is made at the selected feedrate (F).<br />
Switch position Distance<br />
1 0.001 mm or 0.0001 inches<br />
10 0.010 mm or 0.0010 inches<br />
100 0.100 mm or 0.0100 inches<br />
1000 1.000 mm or 0.1000 inches<br />
10000 10.000 mm or 1.0000 inches
Change language