CNC 8055 - Operating manual (MC option) - Fagor Automation
CNC 8055 - Operating manual (MC option) - Fagor Automation
CNC 8055 - Operating manual (MC option) - Fagor Automation
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
3.<br />
WORKING WITH OPERATIONS OR CYCLES<br />
<strong>CNC</strong> <strong>8055</strong><br />
<strong>CNC</strong> <strong>8055</strong>i<br />
·<strong>MC</strong>· OPTION<br />
SOFT: V01.3X<br />
·72·<br />
<strong>Operating</strong> <strong>manual</strong><br />
Some cycles may be carried out in the tool position or may be associated a multiple positioning so<br />
the cycle may be repeated in several locations. The positioning moves may be selected with each<br />
one of the following keys:<br />
Multiple positioning in several locations.<br />
Multiple positioning in a straight line.<br />
Multiple positioning in an arc.<br />
Multiple positioning in a rectangular pattern.<br />
Multiple positioning in a grid pattern.<br />
It is possible to combine ISO-coded blocks with standard and/or user cycles to create part-programs.<br />
Chapter "5 Saving programs" describes in detail how to do it and how to use those programs.<br />
To de-select a cycle and return to the standard screen, press the key for the selected cycle (the one<br />
with the lamp on) or the [ESC] key.<br />
When operating in conversational mode, do not use global parameters 150 through 299 (both<br />
included), because the operations or cycles can modify these parameters and cause the machine to<br />
malfunction.
Change language