CNC 8055 - Operating manual (MC option) - Fagor Automation

More documents

Recommendations

Info

4. OPERATING IN ISO MODE CNC 8055 CNC 8055i ·128· Editing blocks in ISO mode ·MC· OPTION SOFT: V01.3X 4.1 Editing blocks in ISO mode Operating manual When accessing the ISO mode, the CNC displays a special screen for editing up to 6 program blocks either in ISO code or in high level language. After editing a block, press [ENTER] to validate it. Example: G95 G96 S120 M3 G0 Z100 G1 X30 F0.1 Once the block or blocks have been edited, press [ESC]. The upper right side of the screen will show the "start" symbol. From this moment one, the edited blocks may be simulated, executed or saved like any operation or cycle.
Operating manual 4.2 Programming assistance 4.2.1 Zero offsets and presets 4.2.2 Work zones The icon may be used to select the following options: Machine zero. It cancels any zero offset and assumes the machine zero (home) as reference. Absolute zero offset. It permits defining, enabling or defining + enabling the absolute zero offsets (G54 ... G57, G159N7 ... G159N20). The zero offset is selected with an icon. Incremental offset: It permits defining, enabling or defining + enabling the incremental zero offsets (G58 or G59). The zero offset to be activated is selected with an icon. Preset: The preset value for the active axes may be edited on the screen. If any of them is not to be preset, leave its field empty. The cycle internally generates a block with function G53, G54...G59, G159N7...G159N20 or G92. Pressing the [ZERO] key accesses the zero offset table. The icons may be used to defined the following options: Select the work zone to act upon. Up to five different zones may be defined. Type of action to carry out with the zone. A zone may be defined, enabled, defined+enabled or disabled. Define the type of zone. Each one of them may be defined either as a no-entry or no-exit zone. The numeric fields permit editing the lower and upper limits of the zone. The limits are defined on the X, Y, Z axes. To only define either the upper or the lower limit, leave the values of the other limit blank. The cycle internally generates up to three blocks with functions G20, G21 and G22. 4.2.3 Place labels and repetitions from label to label This cycle permits editing labels and repetition blocks between two labels. It is selected with an icon. Edit labels. There is a field to enter the block number an another one to add a comment. The cycle generates this type of a block: N10; -> Comment. Block repetition. The repetition takes place between the first and final labels programmed, the number of times that is indicated. The cycle internally generates an RPT block. 4. OPERATING IN ISO MODE Programming assistance CNC 8055 CNC 8055i ·MC· OPTION SOFT: V01.3X ·129·
Page 1 and 2:
CNC 8055 ·MC· Operating manual Re
Page 3 and 4:
Operating manual INDEX About the pr
Page 5 and 6:
ABOUT THE PRODUCT BASIC CHARACTERIS
Page 7:
DECLARATION OF CONFORMITY The manuf
Page 10 and 11:
CNC 8055 CNC 8055i ·10· Version h
Page 12 and 13:
CNC 8055 CNC 8055i ·12· Safety co
Page 14 and 15:
CNC 8055 CNC 8055i ·14· Safety co
Page 16 and 17:
CNC 8055 CNC 8055i ·16· Warranty
Page 18 and 19:
CNC 8055 CNC 8055i ·18· Material
Page 20 and 21:
CNC 8055 CNC 8055i ·20· Additiona
Page 22 and 23:
CNC 8055 CNC 8055i ·22· Fagor doc
Page 24 and 25:
1. GENERAL CONCEPTS Keyboard CNC 80
Page 26 and 27:
1. GENERAL CONCEPTS General concept
Page 28 and 29:
1. GENERAL CONCEPTS General concept
Page 30 and 31:
1. GENERAL CONCEPTS CNC 8055 CNC 80
Page 32 and 33:
2. OPERATING IN JOG MODE Introducti
Page 34 and 35:
Page 36 and 37:
Page 38 and 39:
Page 40 and 41:
2. OPERATING IN JOG MODE Home searc
Page 42 and 43:
2. OPERATING IN JOG MODE Jog moveme
Page 44 and 45:
Page 46 and 47:
Page 48 and 49:
Page 50 and 51:
2. OPERATING IN JOG MODE Tool contr
Page 52 and 53:
2. OPERATING IN JOG MODE Tool contr
Page 54 and 55:
2. OPERATING IN JOG MODE Tool calib
Page 56 and 57:
Page 58 and 59:
Page 60 and 61:
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
Page 68 and 69:
2. OPERATING IN JOG MODE CNC 8055 C
Page 70 and 71:
2. OPERATING IN JOG MODE ISO manage
Page 72 and 73:
3. WORKING WITH OPERATIONS OR CYCLE
Page 74 and 75:
Page 76 and 77:
Page 78 and 79: 3. WORKING WITH OPERATIONS OR CYCLE
Page 130 and 131: 4. OPERATING IN ISO MODE CNC 8055 C
Page 132 and 133: 4. OPERATING IN ISO MODE Programmin
Page 134 and 135: 5. SAVING PROGRAMS CNC 8055 CNC 805
Page 148 and 149: 6. EXECUTION AND SIMULATION CNC 805
Page 150 and 151: 6. EXECUTION AND SIMULATION CNC 805
Page 152 and 153: 6. EXECUTION AND SIMULATION Executi
Page 154 and 155: 6. EXECUTION AND SIMULATION Graphic
Page 156 and 157: 6. EXECUTION AND SIMULATION Graphic
Page 158: 6. CNC 8055 CNC 8055i ·MC· OPTION
show all

CNC 8055 - Operating manual (MC option) - Fagor Automation

Create successful ePaper yourself

Delete template?

Save as template?