EN: man_8065_chn.pdf - Fagor Automation
EN: man_8065_chn.pdf - Fagor Automation
EN: man_8065_chn.pdf - Fagor Automation
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Execution channels<br />
6.4.3 Remove a spindle from the configuration.<br />
The instruction #FREE SP may be used to remove one or several spindles from the channel.<br />
The CNC removes them from the configuration of the channel and does not assign them to<br />
another channel.<br />
Programming.<br />
When programming this instruction, you must define the spindles to be removed from the<br />
configuration. The ALL com<strong>man</strong>d may be used to remove all the spindles of the channel.<br />
Programming format.<br />
The programming format is the following; the parameters to be set appear between curly<br />
brackets and the optional parameters between angle brackets.<br />
#FREE AX ALL<br />
#FREE AX [{sn}]<br />
{sn} Spindle name.<br />
ALL Com<strong>man</strong>d to remove all the spindles from the channel<br />
#FREE SP [S]<br />
(It removes the spindle S from the configuration)<br />
#FREE SP [S1,S4]<br />
(It removes spindles S1 and S4 from the configuration)<br />
#FREE SP ALL<br />
(It removes all the spindles from the configuration)<br />
6.<br />
PROGRAMMING IN A SYSTEM WITH CHANNELS.<br />
Spindle swapping.<br />
CNC <strong>8065</strong><br />
(REF: 1103)<br />
·103·
Change language