EN: man_8065_chn.pdf - Fagor Automation
EN: man_8065_chn.pdf - Fagor Automation
EN: man_8065_chn.pdf - Fagor Automation
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
3.<br />
LOGIC CNC INPUTS AND OUTPUTS.<br />
CNC <strong>8065</strong><br />
(REF: 1103)<br />
·58·<br />
Consulting and modifiable signals of the spindle.<br />
SYNSPEED<br />
Execution channels<br />
There is a mark for each spindle. The mnemonics for each spindle are the following:<br />
SYNSPEED1 SYNSPEED2 SYNSPEED3 SYNSPEED4<br />
This mark is activated at the slave spindle when it is synchronized in speed.<br />
This mark is set to (=0) when exceeding the maximum speed error allowed, whose default<br />
value is set by machine parameter DSYNCVELW.<br />
SYNCPOSI<br />
There is a mark for each spindle. The mnemonics for each spindle are the following:<br />
SYNCPOSI1 SYNCPOSI2 SYNCPOSI3 SYNCPOSI4<br />
This mark is activated at the slave spindle when it is synchronized in position.<br />
This mark is set to (=0) when exceeding the maximum position error allowed, whose default<br />
value is set by machine parameter DSYNCPOSW.<br />
GEAROK<br />
There is a mark for each spindle. The mnemonics for each channel are the following.<br />
GEAROK1 (can also be programmed as GEAROK)<br />
GEAROK2 GEAROK3 GEAROK4<br />
The spindle activates this mark when the parameter set selected at the CNC and at the PLC<br />
are the same. In order for both parameter sets to coincide, funciton M41 must be active at<br />
the CNC and the GEAR1 mark at the PLC, M42 with GEAR2 and so on.<br />
If both parameter sets do not coincide, the CNC executes no action. Include this mark in the<br />
PLC routine to define the actions to carry out when both parameter sets do not coincide, such<br />
as stop the spindle or interrupt the execution of the part-program.
Change language