EN: man_8065_chn.pdf - Fagor Automation
EN: man_8065_chn.pdf - Fagor Automation
EN: man_8065_chn.pdf - Fagor Automation
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
3.<br />
LOGIC CNC INPUTS AND OUTPUTS.<br />
CNC <strong>8065</strong><br />
(REF: 1103)<br />
·64·<br />
Consulting and modifiable signals of the spindle.<br />
3.6.2 Modifiable signals.<br />
NOWAIT<br />
Execution channels<br />
There is a mark for each channel. The mnemonics for each channel are the following.<br />
NOWAITC1 NOWAITC2 NOWAITC3 NOWAITC4<br />
It is applied to channel synchronization. The PLC sets this mark high (=1) to cancel all the<br />
synchronizations with the CNC channel.<br />
For example, with the NOWAITC1 signal set to (=1), the waits programmed in any channel<br />
with the #WAIT, instruction and that refer to a mark of channel 1, they finish immediately and<br />
the program execution resumes.
Change language