EN: man_8065_chn.pdf - Fagor Automation

2.
SETTING A MULTI-CHANNEL SYSTEM.
CNC 8065
·42·
Setting the machine parameters.
(REF: 1103)
2.1.5 Channel operation and display.
The following parameters correspond to the HMI parameters.
CHANGEKEY
Customizing the change key.
Execution channels
This table shows the parameters to configure the change key. The table has the following
machine parameters.
CHANGEKEY
FUNCTION Function of the change key.
SYSMENUMODE Behavior of the system menu.
SYSHMENU Horizontal system menu.
SYSVMENU Vertical system menu.
FUNCTION
Function of the change key.
Possible values: Next page / Next channel / Menu
Default value: Next page.
Parameter included in the CHANGEKEY table.
Depending on the function selected, it is possible to carry out one of the following tasks.
Value. Meaning.
Next page. The key selects the next page of the active work mode.
Next Channel. The key selects the next channel.
Menu. The key shows the list of channels and pages on the softkey
menus.
SYSMENUMODE
Behavior of the system menu.
Possible values: Volatile / Fixed.
Default value: Volatile.
Parameter included in the CHANGEKEY table.
This parameter determines when the system menu is disabled.
Value. Meaning.
Volatile. The softkey menu is disabled when selecting a menu option
or when changing the active component.
Fixed. The softkey menu remains until the change key is pressed
again.
SYSHMENU
Horizontal system-menu.
Possible values: Disabled / Pages / Channels / Components.
Default value: Disabled.
Parameter included in the CHANGEKEY table.
See parameter SYSHMENU.