EN: man_8065_chn.pdf - Fagor Automation
EN: man_8065_chn.pdf - Fagor Automation
EN: man_8065_chn.pdf - Fagor Automation
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
PROGRAMMING IN A SYSTEM WITH<br />
CHANNELS.<br />
6<br />
This <strong>man</strong>ual only shows the programming functions that are directly related to the multichannel<br />
version. The rest of the functions, that are also valid both in a multi-channel CNC<br />
and in a single channel CNC, are described in the programming <strong>man</strong>ual.<br />
Executing a program in the specified channel.<br />
From the automatic mode, each channel can execute its own program. Via part-program<br />
or in MDI/MDA mode, it is possible to com<strong>man</strong>d the execution of a program in a particular<br />
channel. When selecting the program to execute, it is possible to indicate its location.<br />
Executing a block in the indicated channel.<br />
Via part-program or MDI, it is possible to com<strong>man</strong>d the execution of a block in a particular<br />
channel.<br />
Axis swapping.<br />
Initially, each channel has some axes assigned to it as set by the machine parameters.<br />
While executing a program, a channel may release its axes, request new axes or reorder<br />
the existing ones.<br />
Spindle swapping.<br />
Initially, each channel has some spindles assigned to it as set by the machine parameters.<br />
While executing a program, a channel may release its spindles or request new spindles.<br />
Communication and synchronization.<br />
These functions deal with such matters as swapping axes or spindles, synchronizing<br />
channels, etc.<br />
CNC <strong>8065</strong><br />
(REF: 1103)<br />
·87·
Change language