EN: man_8065_chn.pdf - Fagor Automation
EN: man_8065_chn.pdf - Fagor Automation
EN: man_8065_chn.pdf - Fagor Automation
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
7.<br />
MULTI-SPINDLE SYSTEM. SPINDLE CONTROL.<br />
CNC <strong>8065</strong><br />
(REF: 1103)<br />
·120·<br />
G96/G97. Turning speed or constant surface speed.<br />
Remarks.<br />
Execution channels<br />
The speed may be set by program or by PLC; the one set by PLC has the highest priority.<br />
Speed set. V.PLC.S.sn V.A.PRGS.sn V.A.SPEED.sn<br />
By program; S5000.<br />
By PLC; none.<br />
By program; S5000.<br />
By PLC; S9000.<br />
By program; S5000.<br />
By PLC; S3000.<br />
By program; S5000.<br />
By PLC; none.<br />
By MDI; S8000.<br />
By program; S5000.<br />
By PLC; S9000.<br />
By MDI; S8000.<br />
By program; S5000.<br />
By PLC; S3000.<br />
By MDI; S8000.<br />
(V.)[ch].PLC.S.sn<br />
Variable that can be read and written from the PLC and read from the program and from the interface.<br />
The variable returns the execution value; reading it interrupts block preparation.<br />
Channel [ch]. Speed active by PLC for G97.<br />
The speed programmed by PLC prevails over the one programmed by program or MDI. To<br />
cancel the speed by PLC, set the variable to ·0·; the CNC applies the speed active by<br />
program.<br />
Syntax.<br />
·ch· Channel number.<br />
·sn· Name, logic number or index of the spindle.<br />
V.PLC.S.S2 Spindle S2.<br />
(V.)[ch].A.PRGS.sn<br />
(V.)[ch].SP.PRGS.sn<br />
Variable that can only be read from the program, PLC and interface.<br />
The variable returns the value of block preparation.<br />
Channel [ch]. Speed active by program for G97.<br />
Being G97 active, programming a new speed in MDI mode updates the value of this variable.<br />
Syntax.<br />
·ch· Channel number.<br />
·sn· Name, logic number or index of the spindle.<br />
0 5000 5000<br />
9000 5000 9000<br />
3000 5000 3000<br />
0 8000 8000<br />
9000 8000 9000<br />
3000 8000 3000<br />
V.PLC.S.5 Spindle with logic number ·5·.<br />
V.[2].PLC.S.1 Spindle with index ·1· in the channel ·2·.<br />
V.A.PRGS.S Spindle S.<br />
V.SP.PRGS.S Spindle S.<br />
V.SP.PRGS Master spindle.<br />
V.A.PRGS.5 Spindle with logic number ·5·.<br />
V.SP.PRGS.2 Spindle with index ·2· in the system.<br />
V.[2].SP.PRGS.1 Spindle with index ·1· in the channel ·2·.