EN: man_8065_chn.pdf - Fagor Automation

Execution channels
SPINDLE SPEED IN G96 (CSS).
(V.)[ch].A.CSS.sn
(V.)[ch].SP.CSS.sn
Variable that can only be read from the program, PLC and interface.
The variable returns the execution value; reading it interrupts block preparation.
Channel [ch]. Active spindle speed in G96.
Syntax.
·ch· Channel number.
·sn· Name, logic number or index of the spindle.
V.A.CSS.S Spindle S.
V.SP.CSS.S Spindle S.
V.SP.CSS Master spindle.
V.A.CSS.5 Spindle with logic number ·5·.
V.SP.CSS.2 Spindle with index ·2· in the system.
V.[2].SP.CSS.1 Spindle with index ·1· in the channel ·2·.
Remarks.
The speed may be set by program or by PLC; the one set by PLC has the highest priority.
Speed set. V.PLC.CSS.sn V.A.PRGCSS.sn V.A.CSS.sn
By program; S150.
By PLC; none.
By program; S150.
By PLC; S250.
By program; S150.
By PLC; S100.
By program; S150.
By PLC; none.
By MDI; S300.
By program; S150.
By PLC; S250.
By MDI; S200.
By program; S150.
By PLC; S100.
By MDI; S200.
(V.)[ch].PLC.CSS.sn
Variable that can be read and written from the PLC and read from the program and from the interface.
The variable returns the execution value; reading it interrupts block preparation.
Channel [ch]. Speed active by PLC for G96.
The speed programmed by PLC prevails over the one programmed by program or MDI. To
cancel the speed by PLC, set the variable to ·0·; the CNC applies the speed active by
program.
Syntax.
·ch· Channel number.
·sn· Name, logic number or index of the spindle.
V.PLC.CSS.S2 Spindle S2.
0 150 150
250 150 250
100 150 100
0 300 300
250 200 250
100 200 100
V.PLC.CSS.5 Spindle with logic number ·5·.
V.[2].PLC.CSS.1 Spindle with index ·1· in the channel ·2·.
7.
MULTI-SPINDLE SYSTEM. SPINDLE CONTROL.
G96/G97. Turning speed or constant surface speed.
CNC 8065
(REF: 1103)
·121·