EN: man_8065_chn.pdf - Fagor Automation
EN: man_8065_chn.pdf - Fagor Automation
EN: man_8065_chn.pdf - Fagor Automation
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Execution channels<br />
6.2 Executing a block in the indicated channel.<br />
With the #EXBLK instruction, it is possible, from a program in execution or via MDI, to execute<br />
a block in another channel.<br />
If the channel where the block to be executed is busy, the CNC waits for the operation in<br />
progress to end. After executing the block, the channel goes back to the previous work mode.<br />
Programming format.<br />
The programming format is: Optional parameters are indicated between angle brackets.<br />
#EXBLK [{block}]<br />
{block} Block to be executed.<br />
{channel} Optional. Channel where the block is to be executed.<br />
#EXBLK [G01 X100 F550, 2]<br />
(The block is executed in channel ·2·)<br />
#EXBLK [T1 M6]<br />
(The block is executed in the current channel)<br />
Channel where the block is to be executed.<br />
Programming the channel is optional. If the channel is not indicated and the instruction is<br />
executed from the program, the block is executed in its own channel. If the instruction is<br />
executed in MDI and the channel is not indicated, the block is executed in the active channel.<br />
6.<br />
PROGRAMMING IN A SYSTEM WITH CHANNELS.<br />
Executing a block in the indicated channel.<br />
CNC <strong>8065</strong><br />
(REF: 1103)<br />
·89·
Change language