EN: man_8065_chn.pdf - Fagor Automation
EN: man_8065_chn.pdf - Fagor Automation
EN: man_8065_chn.pdf - Fagor Automation
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Execution channels<br />
DMxx<br />
This mark is associated with some M auxiliary functions.<br />
The marks associated with functions M00, M01, M02, M06, M08, M09, M30 have a mark<br />
for each channel. Here is an example of the mnemonics for DM00; it is the same for the rest<br />
of the marks (DM01, DM02, DM06, DM08, DM09, DM30).<br />
DM00C1 (can also be programmed as DM00)<br />
DM00C2 DM00C3 DM00C4<br />
The marks associated with functions M03, M04, M05, M19, M41, M42, M43, M44 have a<br />
mark for each spindle. Here is an example of the mnemonics for DM03; it is the same for<br />
the rest of the marks (DM04, DM05, DM19, DM41, DM42, DM43, DM44).<br />
DM03SP1 (can also be programmed as DM03)<br />
DM03SP2 DM03SP3 DM03SP4<br />
The CNC indicates in these marks the status of the spindle auxiliary M functions. The mark<br />
is set to (=1) if the function is active and to (=0) if otherwise.<br />
3.<br />
LOGIC CNC INPUTS AND OUTPUTS.<br />
Consultation and modifiable signals associated with the –M–<br />
function.<br />
CNC <strong>8065</strong><br />
(REF: 1103)<br />
·53·
Change language