EN: man_8065_chn.pdf - Fagor Automation
EN: man_8065_chn.pdf - Fagor Automation
EN: man_8065_chn.pdf - Fagor Automation
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
CNC-PLC COMMUNICATION.<br />
–M– and –H– functions with channels.<br />
4<br />
The M and H functions are exchanged by channel. When using several channels, the marks<br />
and registers of these functions must indicate the channel number they refer to. If no channel<br />
number is indicated, the marks and registers refer to the first channel.<br />
–S– functions with multiple spindles.<br />
The exchange of S functions is independent from the channel. When using several spindles,<br />
the marks and registers of these functions refer to the spindle number. The spindle number<br />
is determined by its logic number.<br />
CNC <strong>8065</strong><br />
(REF: 1103)<br />
·69·
Change language