EN: man_8065_chn.pdf - Fagor Automation

Execution channels
Messages active at the CNC.
For each channel, the CNC shows the last message activated by the program that is running.
The window shows the last message of the active channel. If there are messages in other
channels, it will highlight the "+" sign next to the message window. To display the list of active
messages, press the key combination [CTRL]+[O] or click on the CNC message line. The
list of messages shows, next to each message, the channel where it is active.
PLC messages.
If the PLC activates two or more messages, the CNC displays the message with the highest
priority and it will show the "+" sign indicating that there are more messages activated by
the PLC. To display the list of active messages, press the key combination [CTRL]+[M] or
click on the PLC message line.
On the message list and next to each message, a symbol will appear to indicate whether
the message has an additional information file associated with it or not. To display a message,
select it with the cursor and press [ENTER]. If the message has an additional information
file, it will be displayed on the screen.
5.
OPERATION AND INTERFACE.
The general status bar.
CNC 8065
(REF: 1103)
·83·