Using ArcCatalog

command, its ToolTip—a short
message in a floating yellow
box—displays. A command’s
Message displays in the status
bar. The Message describes the
action performed by the
command.
4. Check Text Only to display
only the command’s caption.
Check Image Only to display
only the command’s image.
Check Image and Text to
display both its image and its
caption.
The command’s display type
changes.
5. Click Close in the Customize
dialog box.
The command’s
display type changes.
Changing the image
1. Show the toolbar containing
the command whose image
you want to change.
2. Click the Tools menu and
click Customize.
3. In the toolbar, right-click the
command you want to
change.
4. Point to Change Button
Image.
5. Click one of the images
displayed. Or click Browse,
navigate to a custom image,
then click Open.
The new image is applied. It
appears in the toolbar if the
display type is Image Only or
Image and Text.
6. Click Close in the Customize
dialog box.
3
The new image appears in the
toolbar if the display type is
Image Only or Image and Text.
5
244 USING ARCCATALOG