ASXpress Operator's Manual - CETAC Technologies

More documents

Recommendations

Info

ASXpress Rapid Sample Introduction System Operator’s Manual Chapter 9: Guide to Operating a CETAC Autosampler Using a Terminal Program 8. On the Settings tab, click ASCII Setup Figure 9-10 9 Click ASCII Setup. “Com 1 Properties” Window 10 Enable “Echo typed characters locally” and “Append line feeds to incoming line ends,” then click OK. Figure 9-11 “ASCII Setup” Window 122
ASXpress Rapid Sample Introduction System Operator’s Manual Chapter 9: Guide to Operating a CETAC Autosampler Using a Terminal Program 10. Turn on the autosampler. The HyperTerminal window should display an OK. 9.3 Autosampler Commands The following commands will produce various responses of the autosampler. Command Ver Home Tray=n Tube=row-col-down Pmp on Pmp off Rinse Down=n Up Description Returns firmware version. Returns all axis to home position, same as power up. Defines tray size and n= #of positions. Legal values are 21, 24, 40, 60, and 90. Tube=row-column-down as defined by tray command. Example: Tube=3-4- 150 Pump on if unit has a pump. Pump off if unit has a pump. Moves sipper to the rinse position, extends and retracts the sipper 3 times and starts rinse pump. Stays in down position with pump running. up,pmp off stops the pump. Moves the z-axis down by the parameter(n) in mm. Do not run Down command if sipper is not all the way up on up position or damage may occur to sipper or z-axis. Moves z-axis to upper most postion. Table 9-1 Autosampler Commands You can use these commands to determine if the CETAC autosampler is communicating and functioning properly. If more assistance is needed, please contact CETAC customer service. 123
Page 1 and 2:
CETAC ASXPRESS Rapid Sample Introdu
Page 3 and 4:
Contents
Page 5 and 6:
ASXpress Rapid Sample Introduction
Page 7 and 8:
1 Introduction
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
2 Preparing for Installation
Page 17 and 18:
Page 19 and 20:
3 Installing the Rapid Sample Intro
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72: ASXpress Rapid Sample Introduction
Page 81 and 82: 4 Verifying Installation/ Function
Page 89 and 90: 5 Using the Rapid Sample Introducti
Page 95 and 96: 6 Maintaining the Rapid Sample Intr
Page 103 and 104: 7 Troubleshooting the Rapid Sample
Page 113 and 114: 8 Glossary
Page 115 and 116: 9 Guide to Operating a CETAC Autosa
Page 121: ASXpress Rapid Sample Introduction
Page 133 and 134: Index
Page 136: Manual Part Number 480166 Rev 4 Pri
show all

ASXpress Operator's Manual - CETAC Technologies

Create successful ePaper yourself

Delete template?

Save as template?