ASXpress Operator's Manual - CETAC Technologies

More documents

Recommendations

Info

ASXpress Rapid Sample Introduction System Operator’s Manual Chapter 4: Verifying Installation/ Function Overview timing parameters. 7 Click on the “Inject” button (Figure 4-3); doing this so will position the ASXPRESS 6-port valve into the mode in which sample injection into the ICP takes place (via the Peristaltic pump on the ICP), and will illuminate the “Inject” Led on the front panel of the ASXPRESS electronics module (no autosampler operation takes place at this time). 8 Click the “Manual Cycle” button (Figures 4-2 and 4-3); doing this will perform one complete cycle of system operation, operating each component on the ASXPRESS system and autosampler, using the saved or queried parameters of the Configuration Tool software settings (See “Principal of Operation” located on the CD provided with the ASXPRESS system). This is also a useful function for loading the tubing and priming the rinse pump. 9 Click on the other manual function radio buttons (autosampler pump control and vacuum pump control), (Figure 4-3) cycling them on and off to verify proper operation. Figure 1-51 Xpress Configuration Tool—“Query ASXpress Params” (post-query) 84
ASXpress Rapid Sample Introduction System Operator’s Manual Chapter 4: Verifying Installation/ Function Overview Figure 1-52 Xpress Configuration Tool—Expanded Window Note: At any time that parameter changes are made within the Xpress Configuration Tool software, the user must save those settings by clicking the “Save to ASX” button for them to be used and retained for future use. Clicking on this button saves the currently selected settings to the Rabbit processor module in the autosampler. 85
Page 1 and 2:
CETAC ASXPRESS Rapid Sample Introdu
Page 3 and 4:
Contents
Page 5 and 6:
ASXpress Rapid Sample Introduction
Page 7 and 8:
1 Introduction
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
2 Preparing for Installation
Page 17 and 18:
Page 19 and 20:
3 Installing the Rapid Sample Intro
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34: ASXpress Rapid Sample Introduction
Page 81 and 82: 4 Verifying Installation/ Function
Page 83: ASXpress Rapid Sample Introduction
Page 89 and 90: 5 Using the Rapid Sample Introducti
Page 95 and 96: 6 Maintaining the Rapid Sample Intr
Page 103 and 104: 7 Troubleshooting the Rapid Sample
Page 113 and 114: 8 Glossary
Page 115 and 116: 9 Guide to Operating a CETAC Autosa
Page 133 and 134: Index
Page 136:
Manual Part Number 480166 Rev 4 Pri
show all

ASXpress Operator's Manual - CETAC Technologies

Create successful ePaper yourself

Delete template?

Save as template?