ASXpress Operator's Manual - CETAC Technologies

ASXpress Rapid Sample Introduction System Operator’s Manual
Chapter 3: Installing the Rapid Sample Introduction System
Figure 1-67
“Open” Window (ASX-260, ASX-520)
Figure 1-68
“Open” Window (ASX-520HS)
7 Click the Open button to select the appropriate file (Figure 3-67 and
Figure 3-68). The “Choose Flash Image” window reappears.
8 Click the OK button (Figure 3-66). A progress bar will appear
indicating loading of the selected firmware file.
NOTE:
The .bin file name shown in Figure 3-63 (i.e. ASXpress_1_19 or
ASXpress_HS_1_19) will vary depending on which era ASXPRESS FW is
being loaded. CETAC Technologies makes every effort to update the
firmware as needed to ensure that the most beneficial functionality is
provided to the customer.
As of December 2009, the most current firmware version file name is
“ASXpress_1_19” for standard speed autosamplers or
“ASXpress_HS_1_19” for High Speed autosamplers.
9 When the status bar completes its movement, indicating completion
of the firmware load to the rabbit module within the autosampler,
the Rabbit Field Utility can be closed.
78