ASXpress Operator's Manual - CETAC Technologies

ASXpress Rapid Sample Introduction System Operator’s Manual
Chapter 3: Installing the Rapid Sample Introduction System
Figure 1-53
Readme information window
3 The “Destination Folder” window appears. Click the “Change”
button to modify the folder name or location, or click “Next” to
select the default location as depicted in Figure 3-54.
Figure 1-54
Destination Folder window
4 The “Ready to Install the Program” window appears (Figure 3-55).
Review the selected settings. Click the “Back” button to change any
selected settings. Click the “Install” button to begin the installation
process with the selected settings.
65