ASXpress Operator's Manual - CETAC Technologies

ASXpress Rapid Sample Introduction System Operator’s Manual
Chapter 5: Using the Rapid Sample Introduction System
5 Using the Rapid Sample Introduction
System
The ASXPRESS Rapid Sample Introduction System is both reliable and easy to
use. Before using it, however, ensure that your lab environment provides
operating conditions that will prolong the life of the ASXPRESS system. Once the
proper operating conditions are met, you can operate the rapid sample
introduction system. When you finish using the ASXPRESS system, it may be
necessary to flush the rinse station and flow path before shutting the system
down.
This chapter explains how to create the proper operating conditions for using
the ASXPRESS Rapid Sample Introduction System. It also explains how to start
and shut down the system, and how to flush the rinse station and flow path.
5.1 Establishing Optimal Operating Conditions
The ASXPRESS Rapid Sample Introduction System operates reliably under
virtually the same operating conditions described in the autosampler
Operator’s Manual. However, it is not indestructible. Malfunction or damage
can occur if specific operating conditions are not met. Meeting these
conditions requires that you create the proper lab environment, replace
ASXPRESS Rapid Sample Introduction System components that wear out under
normal use, and purchase the appropriate supplies. The following sections
explain how to meet these conditions.
Note:
Damage or malfunction that results from exposure to inappropriate
operating conditions may constitute misuse and abuse and be excluded
from warranty coverage.
5.1.1 Creating the Lab Environment
To create satisfactory operating conditions in your lab environment, follow these
guidelines:
• Operate the ASXPRESS Rapid Sample Introduction System in a
conventional lab environment where the temperature is 55°F to 85°F
(13°C to 30°C), the humidity is 0% to 60% non-condensing and the
unit is not exposed to excessive flammable or corrosive materials.
• Avoid rough handling of the ASXPRESS Rapid Sample Introduction
System. If possible, do not expose the system to vibration or shock.
• Protect the system from long-term exposure to condensation,
corrosive materials, solvent vapor, continual standing liquids, or any
spills into the system cabinet. Exposures of this type can damage the
internal mechanism components as well as the electronics.
90